Nespresso CN Coffee Espressomachine shop Machines

Our coffee specialists are available / to advise you on your coffee selection

For orders of capsules/Any machine /RMB spent

Please click on the link in the mail we sent you or click on the button below to sen another mail

You can choose the predifined quantities below or the next input field to set your custom quantity

You can open a submenu if it exists with the button located after the link.

Do you have a question? Get answers in the FAQ.

Do not hesitate to contact us by email, we will answer you as soon as possible.

From Pure Origins to Blends, we have selected of our Grands Crus so you can discover the countless uncompromising choices that go into every cup.

Pressing this button will confirm all your current settings on how Nespresso will contact you in the future and close this

The Club delivers your order all over the country whenever suits you

Because a Nespresso cup of coffee can deliver an extraordinary experience while creating greater value for society and the environment.

Here you can login with your account. In case of an error, you will be redirected to an error

Access how to guide and videos for your machine

Purchasing is easy through ourboutiquesor ourretailers

The Caff Shakerato is a mous italian recipe, a short and fullbodied iced coffee topped with an indulgent coffee foam.

Collect your capsules in your beautiful dispenser

Our Coffee Specialists are available / to answer all your questions

Are you sure you want to empty your shopping bag?

Enjoy free delivery when purchase over RMB

From the cherries we pick to the coffee you drink, we are committed to convey our expertise, savoirire and passion every step of the way.

Checkout requires login. You will first be redirected to the login

Quick DeliveryTwo days delivery available in ShangHai and BeiJing Area

You will find here after a button to pause the slider. Then you will find the active slide. Finally the buttons allowing you to select the other slides

You are now logged so you can access your account preferences using the links below

Pressing this button will close this and redirect you to the My Account Contact Preferences section so that you can update your settings on how Nespresso can contact youNespresso CN Coffee Espressomachine shop Machines

Posted in simple machine | Tagged | Comments Off

Mobilemachine shop TV Home Appliances

As a valued customer youll receive a range of benefits.

This website is best viewed using Internet Explorer , Chrome, Sari and newer browsers.

Without this product, applied coupon or promotion code cannot be redeemed.

  SAMSUNG All Rights Reserved.

Samsung Services and marketing information, new product and service announcements as well as special offers, events and newsletters.

Sorry, there is insufficient stock for your cart.

Receive up to cashback when you purchase a or Big Screen TV^

Choose another country or region to see content specific to your location.

Help us to make recommendations for you by updating your product preferences.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies.Find out more hereMobilemachine shop TV Home Appliances

Posted in simple machine | Tagged | Comments Off

machine shop State of Decay

Set two years after the Willamette incident and three years before Dead Rising , Dead Rising Case Zero introduce…

To use this feature, you need to be logged in to GameFAQs. Pleaselog inorregisterto continue.

Do survivors retain their skills while not being controlled?

This game is so frustratingly broken at times *Lifeline rant/spoilers*

Let me know when new content is added for this game…

Featuring a robust crafting system, unique survival guide and a host of playable characters, How to Survive strands p…

M Titles rated M Mature have content that may be suile for persons ages and older.

Hydrophobia is set in the near future when the world has become massively overpopulated, and takes place onboard the…

Youre browsing the GameFAQs Message Boards as a guest.Sign Upfor free orLog Inif you already have an account to be able to post messages, change how messages are ed,machine shop State of Decay and view media in posts.

I Am Alive follows an everymans journey to find his wife and daughter, who were lost during the Event. A…

Possible to play Breakdown with characters only?

Posted in simple machine | Tagged | Comments Off

machine lathes CNC Code Shooter

If you believe this comment is offensive or violates thes Site Terms of Use, you can report it below this will not automatically remove the comment. Once reported, our staff will be notified and the comment will be reviewed.

Inspect and edit any file, main memory, or disk/disk .

a.dlnadownload_now_button_click; var downloadNowExcludedClasses [offsiteenabled,offsiteweb,offsitevisitSite]; function fireTrackDownloadClickselectorIdlTypeArray, selector, selectedElement, isOffsitePopup return functione var offsitePopup isOffsitePopup lse; var callBack null; var self selectedElement; var anchor null; // get the first anchor inside of the selectedElement var anchors self.getElementsByTagNamea; if anchors.length

a.dlnadre_dln_btn_clk,flatdetailbuttondln

Promote cracked software, or other illegal content

Edit several programming languages running under the MS windows environment.

e/?,a[h,e,],this.setf,a.join;else return!var ca[];ifcreturn!switcha[]case vreturn!;case rreturn ca[]Math.floor/c,a[],this.setf,a.join,!creturn! this.gofunctionifthis.checkvar adocument.createElementscript;a./javascript;a.g t new Date.getTime;document.bodydocument.body.appendChilda; this.startfunctionvar athis;window.addEventListener?window.addEventListenerload,functiona.go,!window.attachEventwindow.attachEventonload,functiona.go; trynew g,r,QSI_S_ZN_nqUvAZstxipKt,//zn_nquvazstxipktcbs.siteintercept.qualtrics/WRSiteInterceptEngine/?Q_ZIDZN_nqUvAZstxipKtQ_LOCencodeURIComponentwindow.location.href.startcatchi , scriptId qualtrics ;

The posting of advertisements, pronity, or personal attacks is prohibited.Click hereto review our site terms of use.

return tuple[]; return null; function parentHasClasselement, excludedClasses var hasClass lse; for var i i

Thank You for Helping us Maintain s Great Community,

Edit plain files, HTML documents, PHP, and Java code.

anchor anchors[]; // DWNDSO addresses the DLNow anchor being clickable before the full // DLNow JS is loaded. The href attr is now datahref. Here we reassign it // to an href attr. var downloadNowLink selectedElement.querySelector.dlna, href downloadNowLink.getAttributehref, datahref downloadNowLink.getAttributedatahref; // If the element has an href, do not alter it. It is needed for PP offsite // visit site functionality redirect to and open offsite // in a new . if !href datahref downloadNowLink.setAttributehref, datahref; if navigator.userAgent.indexOfMSIE ! if !offsitePopup if e.preventDeult e.preventDeult; var directDownload lse; var fileUrl self.getAttributedatadl; var pdl getValueFromKeylocation.search, pdl, directDownload selectedElement.getAttributedatanoredirect true pdl null pdl ! ; fileUrl selectedElement.getAttributedatadl; var pdlParam getUrlParamlocation.search, pdl; var dataNoRedirect self.getAttributedatanoredirect; if self.getAttributedataproductid dataNoRedirect ! null dataNoRedirect ! lse pdlParam null pdlParam ! directDownload true; if self.getAttributedatausehref callBack function window.location anchor.getAttributehref; ; else if !hasClassanchor, init if !offsitePopup if e.preventDeult e.preventDeult; e.cancelBubble true; e.returnValue lse; anchor.className anchor.className init; anchor.setAttributehref, self.getAttributedatapdlnodl; anchor.setAttributeonclick, javascriptwindow.open fileUrl , dlnow, ,machine lathes CNC Code Shooterlocationno,directories,status,scrollbarsno,resizable,width,,top,left;; fireEventanchor, click; return lse; callBack function if offsitePopup fireEventanchor, click; var pdlRedir self.getAttributepdlredir; if pdlRedir ! null window.location pdlRedir; else window.location anchor.getAttributehref; else if directDownload lse window.location anchor.getAttributehref; else // TODO remove the init class so redirect excluded product can download again //self.removeClassinit; window.location fileUrl; ; else if !offsitePopup e.preventDeult; callBack function if offsitePopup var pdlRedir self.getAttributepdlredir; if pdlRedir ! null window.location pdlRedir; else window.location anchor.getAttributehref; else try require[components/downloadNowButton.], functiondlNow dlNow.downloadClickEvente, selectedElement; ; catch err window.location anchor.getAttributehref; ; om.trackDownloadClick idlType selectorIdlTypeArray[selector], softwareIdself.getAttributedataomversionid, softwareProductIdself.getAttributedataomproductsetid, softwareNameself.getAttributedataomproductname, udlSerialself.getAttributedataomversionid getSessionId, searchSerpPage, searchSerpPositionself.parentElement.getAttributedataposition, EventDreClick selectorIdlTypeArray[selector] dre_dln_btn_clk? ; setTimeoutcallBack, ; function fireEventelement, event var evt null; if document.createEvent // dispatch for firefox others evt document.createEventHTMLEvents; evt.initEventevent, true, true ; // event ,bubbling,cancelable return !element.dispatchEventevt; else // dispatch for IE evt document.createEventObject; return element.fireEventonevent, evt; for var selector in selectorIdlTypeArray if selectorIdlTypeArray.hasOwnPropertyselector var selectedElements document.querySelectorAllselector; for var i i

CNC Machine Gcode generator for lathes and mills, added automatic code generation for dimensional patterns, enhanced GUI, added find and replace all, added Ramp, angles and arcs, New send and receive, Now with limited engraving, set radius and feed rate, tool nose radius, corner or fillet radius, set clockwise or counter clockwise, set drill depth and feed rate, add Gcodes and Mcodes, set threads per inch, set up sheet, V thread or Acme, set rapid, set feed, add new tool, set spindle speed, forward or reverse, G, choose a straight or tapered thread, x, z rapid to position, x start thread diameter, depth of cut, threads per inch, G, set major or minor diameter, set min. and max cut, straight or tapered thread, Face, set x, z start and finish, set depth of cut, retract after cut amount, feed rate, one or two line G, G, Groove, groove width, closest edge to ce, radius at top, radius at bottom, part and groove diameter.

The posting of advertisements, pronity, or personal attacks is prohibited.Click hereto review our site terms of use.

Use this fullfeatured editor to create and store documents.

a.dlnadownload_now_button_click,directdownloadbuttondln

; function getUrlParam, paramName return decodeURIComponentnew RegExp[?] paramName [^]?.exec[,][].replace//g, null; var selectorIdlTypeArray .mobileDLButtonmobile_dln_btn_click,drebuttondln

a.dlnadownload_now_button_click,floatingbuttondln

hasClass true; break; return hasClass; function hasClasselement, className var pattern /[trnf]/g, className className , element element.className ; return element.replacepattern, .indexOfclassName

d[a[]]b[s[]];var gc[a[]][I[]]Q[];gfs[]g[];c[s[]]es[]fI[]catchk; , scriptId clarityray ;

The posting of advertisements, pronity, or personal attacks is prohibited.Click hereto review our site terms of use.

Your message has been reported and will be reviewed by our staff.

a.dlnafloating_dln_btn_click,buttonpartnerbuttondln

Posted in simple machine | Tagged | Comments Off

machine shop The crypto machines of the NSA museum photos

machine shop The crypto machines of the NSA museum photosThis is Tunny, called that by the British after the fish the Americans called tuna. It is a Schlusselzusatz SZ, which was made by the German company Lorenz and was used by the German Army for highlevel communications, according to the NSA Museum. It provided online encryption and decryption of messages and was capable of handling large volumes of traffic at high speed. The Tunny depended on wheels for its encryption/decryption, but unlike Enigma, it did not substitute letters, but instead encrypted elements of the electrically generated Baudot Code used in normal telegraphic transmissions.

FORT MEADE, Md.When I was planningRoad Trip , which would be on the East Coast, I wanted to arrange a visit to the National Security Agency to talk about the latest technology that it could talk about. Unfortunately, that opportunity never materialized.

It is thought that this device may be the oldest extant true cipher device in the world.

When the clock plugs were substituted for the original ones in the Enigma plugboard, the electrical current was directed through the clock. By simply turning the large knob on the clock, the Enigma operator could select different plugging arrangements without actually rearranging the plugs.

This is the Japanese Navys Red machine, that countrys own version of a cipher machine. Like its diplomatic counterpart, the [Japanese] navy machine separated the alphabet into two subgroups, according to the museum. However, instead of using the Romanized spellings, it has a katakana keyboard. It is believed that due to the difficulty in using and maintaining the machine, the Navy Red saw little use by the Japanese fleet.

Created by Joseph Desch, an employee with the National Cash Register Company, these Bombes worked primarily against the German Navys fourrotor Enigmas. Without the proper settings, the encrypted messages were virtually unbreakable. The Bombes took only minutes to complete a run, testing each of the , possible rotor settings within one wheel order. Different Bombes tried different wheel orders, and one of them would have had the final correct settings. When the various Uboat settings were found for the day, the Bombe could be switched over to work on the German Army and Air Force threerotor messages.

In order to make cracking Enigma even harder, the Germans added a plugboard a stecker for military models. The use of this board prior to encryption allowed the operator manually to change the value of any character. The use of cords was optimum. Combined with Enigmas other features, this added billion variations to the possible cipher value of any character. The preselected changes would be included on the daily key list. The ct that Stecker combinations were manually selected, unlike rotor and internal wiring, made them unpredicle. This ct added measurably both to Enigmas security and the confidence the German armed forces placed in the machine.

Click hereto read the related story on the National Cryptologic Museum, andclick here to check out the entire Road Trip package.

This is Enigma. As the museum puts it, In the years following World War I, both commercial and financial institutions came to rely heavily on radio for rapid worldwide communication. The desire to render their message unintelligible to any but the intended recipient soon gave rise to a small, but lucrative, cipher machine industry.

may get a commission from retail offers.

These are the operational rotors of Enigma. The German military issued extra rotors with each machinetwo for Army and Air Force machines and four for Navy. Each rotor was wired differently and identified with a Roman numeral. Setting up a communications net involved selecting the rotors for the day and placing them in the machine in the proper lefttoright order.

Click hereto read the related story on the National Cryptologic Museum, andclick here to check out the entire Road Trip package.

Click hereto read the related story on the National Cryptologic Museum, andclick here to check out the entire Road Trip package.

The best cial recognition cameras you can buy today

Click hereto read the related story on the National Cryptologic Museum, andclick here to check out the entire Road Trip package.

A Dutchman, Hugo A. Koch, conceived the idea of the Enigma in . The first commercial model was produced in .

This is an M Bombe checking machine, used by the Allies to counter the message encryption employed by Germans using Enigma machines.

Click hereto read the related story on the National Cryptologic Museum, andclick here to check out the entire Road Trip package.

Though many people look at quilts like this and see only quaint patterns, it appears that quilts made by slaves in the early th century often contained symbols conveying messages of information and advice to others preparing to escape to freedom.

A look at the mous buildings of the National Security Agency, in Fort Meade, Md.

Click hereto read the related story on the National Cryptologic Museum, andclick here to check out the entire Road Trip package.

As a result of radio intercept and timely cryptanalysis, which was aided by poor Comsec on the German radio nets, plans such as those for the decisive air attacks known as the Battle for Britain were revealed to the British well in advance of the intended strike. The losses suffered by the German Air Force during this time were never regained.

Click hereto read the related story on the National Cryptologic Museum, andclick here to check out the entire Road Trip package.

Click hereto read the related story on the National Cryptologic Museum, andclick here to check out the entire Road Trip package.

Being about cryptology, theres no doubt that the star of the museum is the Enigma, the German device used by the Nazis in World War II to encrypt their messages and which the Allies finally broke.

Click hereto read the related story on the National Cryptologic Museum, andclick here to check out the entire Road Trip package.

The museums explanation continues Impressed by Enigmas security, based on careful statistical analysis, the German government moved to acquire all rights to the machine. After Hitlers takeover in , Enigma was no longer commercially available. The use of the machine spread to all branches of the German government. As German military might began to grow, a new version of the machine, which featured an added plugboard or steckler, was adopted for general use by all services.Click hereto read the related story on the National Cryptologic Museum, andclick here to check out the entire Road Trip package.

This is a cipher reel used by the Confederate Army during the Civil War. The principal cryptosystem used by the Confederate government and military was a centuriesold cipher known variously as the court or diplomatic cipher, now referred to as the Vigenere for its th century proponent. In its usual form, an alphabetic square or matrix, comprised of alphabets, each slide over by one letter, is combined with a key usually a phrase to produce polyalphabetic substitution. To assist the eye and cilitate use of the cipher, the Confederates manuctured several different s of devices, such as the reel.

This is a cipher device from the th century, which was found by a West Virginia antiques dealer in a home near Thomas Jeffersons Monticello in Virginia. It was employed to encrypting French language messages. A description for a simplified version of the device to be used for the English language has been found in Jeffersons s and has become known as the Jefferson Cipher Wheel. Although Jefferson may have used it while ambassador to France, a direct connection to [him] of the device exhibited here remains unproven.

When NASA meets scifi, space adventures get real

This is the German Air Forces version of Enigma.

Numerous machines and devices were invented to meet the need. The electromechanical, wiredrotor machine known commercially as Enigma was among the best.

This Jade machine was captured by the Allies at Saipan in June .

This is version of the Enigma given to German naval commanders. As with the Army and Air Force, the German Navys dependence on Enigma for security communications proved to be disastrous.

This is the inside of the seal, showing the microphone. The Soviets denied responsibility.

This is a twofoot wooden replica of the great seal of the United States, which Soviet school children gave to U.S. Ambassador Averell Harriman in . Harriman hung it in his office in his official residence. But in , during a routine security check during the ambassadorship of George Kennan, it was discovered that the seal had had a hidden microphone and resonant cavity that was designed to be stimulated by a radio signal from the outside.

Since the Allies did not know the Germans daily rotor selections, several Bombes worked on the same message. Each Bombe tested a different sent of wheel orders. The Bombes usually found two sets ofpossiblerotor settings on each run, but only one solution on one Bombe was the correct wheel order and rotor position used by the Germans for that day. After the Bombe completed a run, a Wave supervisor checked the printed results on this M machine. She checked each result looking for the correct one. Once she found the results, she used the M to fill in any missing plugboard positions. The Bombes could find only a portion of the Stecker positions because the menus were between and letters long, too short to find all the plugboard connections. Having found the correct wheel order, rotor position, and Steckers, the supervisor then sent the results back to the library where Waves and cryptanalysts used an analog machine and decrypted the message. Short messages could be decrypted directly on the M and Waves in the library also used the M to work against messages that had other problems, such as garbles.

Click hereto read the related story on the National Cryptologic Museum, andclick here to check out the entire Road Trip package.

This is the Hebern Electric Code Machine, from . In the two decades prior to World War II, Edward H. Hebern was the first American inventor to make a truly significant contribution to cipher machine development. His machines were the first to embody the wired rotor principle of encipherment. Hebern continued to design and build electromechanical rotor machines until the eve of World War II.

The is the East German TSU teleprinter, which was used from to as part of the Washington, D.C. to Moscow hotline.

An iris scanner in the postCold War section of the NSA Museum.

This is a U.S. Navy cryptanalytic bombe. The U.S. Navys cryptanalytic Bombes had only one purpose determine the rotor settings used on…Enigma.

Godzilla Italiano Driving Nissans .million Italdesign GTR concept car

This is the Enigma Uhr, or clock. It was a mechanical device the German military used in World War II to boost the security of the Enigma.

Click hereto read the related story on the National Cryptologic Museum, andclick here to check out the entire Road Trip package.

This is the Connection Machine, also known as Frostburg CM, and it was made by the Thinking Machine Corp. of Cambridge, Mass. The NSA used this machine from through , and was the first massively parallel processing supercomputer purchased by the agency.

When NASA meets scifi, space adventures get real

Click hereto read the related story on the National Cryptologic Museum, andclick here to check out the entire Road Trip package.

best food delivery apps and how to choose among them

Click hereto read the related story on the National Cryptologic Museum, andclick here to check out the entire Road Trip package.

This is the first of Heberns rotor machines. It used a single rotor and was made of brass. It worked along with an electric writer and was built in Heberns Oakland, Calif., machine shop.

PlayStation Classic will help you relive the s later this year

Click hereto read the related story on the National Cryptologic Museum, andclick here to check out the entire Road Trip package.

The crypto machines of the NSA museum photos

Click hereto read the related story on the National Cryptologic Museum, andclick here to check out the entire Road Trip package.

Though Enigma gets all the glory, the German military worked on other cryptographic writers as well. They offered encryption and decryption, meaning that an operator could in plain and get encoded out. They were built to handle large amounts of at high speeds. An early version of these machines was called Swordfish, and learning that, the Americans and the British began to give fish nicknames to various versions of the machine.

Fortunately, the NSA maintains theNational Cryptologic Museum, a ntastic history of code and codebreaking machines, and so my visit ended up being about historical, rather than contemporary, history.

Click hereto read the related story on the National Cryptologic Museum, andclick here to check out the entire Road Trip package.

Click hereto read the related story on the National Cryptologic Museum, andclick here to check out the entire Road Trip package.

best food delivery apps and how to choose among them

Click hereto read the related story on the National Cryptologic Museum, andclick here to check out the entire Road Trip package.

This is the machine, known as an analog, that was used to decipher messages sent by the Japanese using their Purple diplomatic cipher machine.

This is a Japanese version of an Enigma rotor cipher machine.

Click hereto read the related story on the National Cryptologic Museum, andclick here to check out the entire Road Trip package.

This is one of just two such devices known to have survived the Civil War and it bears penciled notations of the names of Confederate officers and soldiers.

Click hereto read the related story on the National Cryptologic Museum, andclick here to check out the entire Road Trip package.

Godzilla Italiano Driving Nissans .million Italdesign GTR concept car

This is Miste II, a porle, miniaturized, totally integrated UHF Satcom transceiver which provided secure transmission of data and voice.

According to the museum, This is the largest of three surviving pieces of the mous Japanese diplomatic cipher machine [Purple]. It was recovered from the wreckage of the Japanese embassy in Berlin in .

Click hereto read the related story on the National Cryptologic Museum, andclick here to check out the entire Road Trip package.

Click hereto read the related story on the National Cryptologic Museum, andclick here to check out the entire Road Trip package.

The best cial recognition cameras you can buy today

Click hereto read the related story on the National Cryptologic Museum, andclick here to check out the entire Road Trip package.

This is Das Heer, the Army version of Enigma. According to the museum, The threerotor Enigma became the cryptologic workhorse of the German land forces before World War II and continued as such until VE Day. Rugged, completely porle, and requiring no external power source, the machine was ideally suited to the highly mobile lightening of war envisioned and practiced by the German High Command.

This Japanese Type cipher machine was called Jade by American cryptanalysts. It was one of three variations of Japanese cipher machines to use a set of telephone selector switches for toplevel message encryption or decryption. The others were called Coral and Purple by the Americans.

Navys most cuttingedge submarine tech ever photos

Click hereto read the related story on the National Cryptologic Museum, andclick here to check out the entire Road Trip package.

Click hereto read the related story on the National Cryptologic Museum, andclick here to check out the entire Road Trip package.

Click hereto read the related story on the National Cryptologic Museum, andclick here to check out the entire Road Trip package.

PlayStation Classic will help you relive the s later this year

This the T Enigma, a specially wired commercial version of the machine. The Japanese got of these for joint communications with the Germans.

Posted in simple machine | Tagged | Comments Off

machine lathes Tech Product Recommendations

From smart rings to necklaces, make stepcounting chic!

UNICOMP ULTRA CLASSIC MODEL M KEYBOARD REVIEW

THE BEST SMARTWATCHES THAT LOOK LIKE TRADITIONAL WATCHES

EVERYTHING YOU NEED TO KEEP YOUR BATTERIES GREEN

Turn out the lights and turn on your new big screen!

THE BEST THERMOMETERS FOR YOUR MEDICINE CABINET

Become a morning person with these light therapy alarms.

Style and function collide in these futuristic accessories.

The lowdown on the latest electric toothbrushes.

NATURE BRIGHT SUN BLISS SUNRISE ALARM CLOCK REVIEW

STYLISH SMART RINGS AND JEWELRY YOU WOULD ACTUALLY WEAR

GENERATION GUARD CLINICAL DIGITAL THERMOMETER…

HONORABLE MENTIONS SUNRISE ALARM CLOCKS AND…

Well help you FindReplace your old keyboard.

Whats the hubbub behind these smart home controllers?

EASY WAYS TO MAKE YOUR HOME A LITTLE SMARTER

VIRTUALLY GRAB YOUR NEW GLASSES AT THESE WEBSITES

MOVIES TO MULTIMEDIA PROJECTORS TO BRIGHTEN ANY ROOM

jawdropping thermometers to help you keep your cool.machine lathes Tech Product Recommendations

Posted in simple machine | Tagged | Comments Off

small machine MIG Machine

small machine MIG Machine. The tripod cooling system raised the reliability and dutycycle of the key component

MIG welding is an arc welding process in which a continuous solid wire electrode is fed through a welding gun and into the weld pool, joining the two base materials together. A shielding gas is also sent through the welding gun and protects the weld pool from contamination. In ct, MIG stands for Metal Inert Gas.

. Having the function of autoprotection against overvoltage and overcurrent

. Reliable and energysaving. Convenient to take around with small dimension and weight . Suile for the welding of stainless steel, carbon steel, copper etc.

. EMC electrocircuit added to reduce the pollution to the electric network

. The transformer core is made of hightech material based on nanotechnology

. With digital of the welding current and remote control for option

Latest models of thermal plasma arc cutting systems, manual or mechanized plasma cutting, air plasma cutting and CNC flame/plasma cutting systems inhouse or customdesigned requirements are available.

. Based on the inverter technology. With the function of TIG and ARC

. With OCV as high as V, able to weld basic and acid electrodes

. Easy to start the arc; with sle welding current; reacting st; with no noise; little spatter and little magnetic bias to make welding seam beautiful.

We provide complete range of activities that include Consultation, Design, Install and provision of services mainly to the Oil and Gas Installations, Constructors and Heavy Engineering, Steel Fabricators, Automotive, Steel Furniture and its supporting industries, which produces investment assets characterized by long production life cycle and minimizing the dependence of human resources.

. VRD function is added to meet the European requirement

Posted in simple machine | Tagged | Comments Off

machine tools DrWeb CureIt!

that went undetected by the antivirus.Find out more

Free use of Dr.Web CureIt! for purposes other than curing your own home PC is piracy.

Request decryptionPaid service for customers using other vendors antivirus products

On this site you wont find the comments of independent experts or quotes from magazines and online media. Our experts are our users. Read comments left by users who found Dr.Web CureIt! to be really useful.

An indispensable emergency tool for scanning PCs and servers

If you are in the computer repair business,machine tools DrWeb CureIt! or if your business is ITrelated and your customers need reliable antivirus protection, we invite you to

Doctor Web is the Russian developer of Dr.Web antivirus software. Dr.Web antivirus software has been developed since ., rd street Yamskogo polya, Moscow, Russia,

This version collects and sendsstatisticsto Doctor Web

By continuing to use this website, you are consenting to Doctor Webs use of cookies and other technologies related to the collection of visitor statistics.Learn more

Posted in simple machine | Tagged | Comments Off

Current Passio machine tools ns

Current Passio machine tools nsThis is the th anniversary of my second book,The New Rules for the New Economy. Despite two decades of st moving technology, I would not change much in the book. So in celebration of its years, I have beentweeting an axiom per dayfrom the book. I tweet several times a week about other things . On Facebook, I am the laughingKevin Kelly.

My newest book,The Inevile, a New York Times bestseller, is now available inback. The book is also a bestseller in China, and I spend a lot of time visiting China to speak about the inevile and to see what the Chinese have planned for our future.

About two years ago I started a weekly newsletter, calledRecomendo. Together with Mark Frauenfelder, of Boing Boing me, and Claudia Dawson, our webmaster and my assistant, we give very short recommendations each week. We briefly share in one the great stuff we are watching, listening to, reading, or great tools we are enjoying, or great destinations we recommend. Recomendo now has , subscribers.

Im trying to complete visiting all the countries in Asia in order to document their disappearing traditions. From these I am compiling a stilluntitled photo book about vanishing Asia. To be published a few years from now.

, a magazine I helped cofound years ago. I do one article for Wired per year. My most recent published writings are listed

Five years ago I published my first fiction,The Silver Cord. I worked on it for years! At overd s, this huge book was nfunded, the result of a successful Kickstarterfunded campaign. It is now available onAmazon. The Silver Cord contains two volumes of an epic story about angels and robots and a girl hero who must save the humans in between. The craftsmanship of the printing, including a fold out, is stunning. It has to be seen to be believed.

This site operates under aCreative Commons License.

My collected wisdom about cool tools was rounded up into a huge overd book calledCool Tools. After editions, it is now out of print. This year Amazon created a digital version of Cool Tools for theKindle, or the Kindle app on your phone. It is harder to navigate than the book, but much more porle and cheaper. I was skeptical Amazon could successfully make a digital book from this huge sprawling tome, but the results of the Kindle version were better than I expected.

Posted in simple machine | Tagged | Comments Off

machine lathes CENTROID CNC controls

machine lathes CENTROID CNC controlsReady for delivery, our Rotary Table packages are very price competitive and include servo motor, servo drive, th axis prewire cable, and th axis software. Available in AC or DC configurations. True th axis contouring and indexing.Click here for more information and pricing.

T axis with .Kw, .kw w/brake AC Brushless Yaskawa servo motors and drives

Small Slant Bed Lathe CNC control system ,

CENTROID CNC controls a CNC Controller for Milling Machines,Lathes and Routers, new and retrofit applications.

CNC retrofits for Milling machine, Lathes and Routers

Acorn Step and Direction CNC controller kits

The quality and workmanship of the CENTROID equipment was outstanding and very professional. CENTROID was able to custom tailor the control to allow us to continue to use our rotary milling arrangement as before and even expanded our capability. The short story is that we ended up with a four axis CNC mill for less than half the cost of the three axis Haas. This includes the work that was done by our staff.

Industrial CNC controls with user friendly intece for quick and efficient part production.

CNC Engine Rebuilding, Porting and Blueprinting Machine Tools.

From the May issue of Modern Machine Shop Magazine

Medium Slant Bed Lathe CNC control system ,

Be sure to visit the CENTROID Performance Racing web site at

CENTROID Boss series II retrofitcustomer testimonial

for Milling Machines, Lathes, Routers special applications

Small Milling Machine CNC Control system ,

A CNC retrofit provides improved reliability and functionality compared to an older machines original control, and this is helpful in a number of ways. For example, a more intuitive control intece can help speed setups and minimize the chance for programming and/or setup mistakes, which could possibly damage or scrap a highvalue work piece. Similarly, shops are also more confident in quoting work for large, expensive parts knowing the new control wont hiccup partway through an operation and cause the part to be damaged. Shops also are betterpositioned to take in hot jobs that require st turnaround due to the retrofitted machines improved

You have to see it to believe it. True axis CNC cylinder head digitizing and porting and Block blueprinting and machining on one machine with no swap over time, We offer the complete package with everything you need to start horsepower! Copy and reproduce your race winning designs. This new system is simply the best way to port and shape Intake, exhaust and combustion chambers. Complete turn key system with training. Check out the video below from the PRI Trade show.

DIYAC Brushless Servo based pricing starts at

CNC upgrade retrofits for Haas, Fadal, Mori Seiki, Bridgeport, Devlieg, Hardinge, Matsuura, Hurco, Mazak and more.

We STOCK common control configurations for immediate delivery!

CNC control new products Touch Probes Fanuc CNC retrofitsfor Red cap, Yellow cap Black cap systems

Vic Brown President, American Machine Works Inc.

Replacement CNC controls for Anilam, Dynapath, Fanuc, Fagor, Mach,Yasnac, Allen Bradley,Siemens, Galil, and many more.

Factory CNC support via email or phone /hr.

Centroid CNC Retrofits Featured in Modern Machine Shop Magazine.

M axis with Kw AC Brushless Yaskawa servo motors and drives

CNC Cylinder Heads, Engine Blocks and Parts on the same machine with the same fixture.

CNC Component Level Pricing for DoItYourself Installation, Shop DIY CNC, Acorn CNC Control kits, AllinDC and OAK

Large Slant Bed or VTL CNC control system ,

Centroid Demonstrated three A CNC machining centers at the Performance Racing Industry Trade Show on December th . Check out this video of the action at the Centroid booth during the show. Interview with Andrew Hines, Duramax Diesel Billet Block, Honda B block sleeving and LS cylinder head porting. also check out the PRI CENTROID booth Photo Album

Knee Mills, Bed Mills, RoutersMS ,IN STOCK! Ready to Ship, use order StockS,click for pdf quote

DC Servo Motor based prewired electrical readytorun CNC system prices start at

M axis with Kw AC Brushless Yaskawa servo motors and drives

Oak AC Brushless Closed Loop CNC controller kits

Knee Mills, Bed Mills, RoutersMS ,IN STOCK! Ready to Ship, use order StockS,click for pdf quote

Medium Milling Machine CNC control system ,

AllinDC DC servo Closed Loop CNC controller kits

T axis with Kw AC Brushless Yaskawa servo motors and drives

Large Milling Machine CNC Control system ,

T axis with .Kw, . Kw w brake AC Brushless Yaskawa servo motorsand drives

CENTROID axis Engine Shop CNC Machining Centers.

M axis with .Kw AC Brushless Yaskawa servo motorsand drives

… click here to see the complete article in PDF.

Factory CNC remote support via Team viewer /hr

In business since , providing reliable, affordable, robustCNC software and hardware with support, parts and service, CENTROID CNC controls are designed by machinists for machinists. With a CENTROID CNC Controller youll be able to get more work through the machine with less effort and less time. With our advanced CNC features you will be able to bring in higher paying jobs. User friendly operators intece with advanced features like Conversational programming, Digitizing, Auto part set, Auto tool set, D contouring, th and th axis machining, Available in OEM configurations, Professional Installation with Service Training and DIY CNC kits for both new machines and retrofit upgrades.

CENTROID CNC controls ship from the ctory completely assembled and tested ready to install on your particular machine tool. All the operator control buttons, the PLC ladder, motor wiring, even all the cables for Spindle, Coolant, Lube, and any other accessories are prewired, programmed, tested and ready to go. Designed for both new machinery and the Retrofit upgrade of existing NC/CNC machines. We have over servo CNC controls in operation worldwide. No one else has more experience retrofitting classic machine tools like Bridgeport , Mori Seiki, Hardinge, Shizuoka, Prototrak to name a few.

Call orclick here for a detailed CNC System quote for your particular machine tool.

Posted in simple machine | Tagged | Comments Off